-- *******************************************************************
-- CISCO-GSLB-SYSTEM-MIB.my: Global Server Load Balancing
-- Platform and System Status
--
-- Dec 2006, Pawan N
--
-- Copyright (c) 2006-2007 by Cisco Systems Inc.
-- All rights reserved.
-- ******************************************************************CISCO-GSLB-SYSTEM-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,NOTIFICATION-TYPE,
Counter32,Unsigned32FROM SNMPv2-SMI
MODULE-COMPLIANCE,NOTIFICATION-GROUP,OBJECT-GROUPFROM SNMPv2-CONF
SnmpAdminStringFROM SNMP-FRAMEWORK-MIB
RowStatus,StorageType,TruthValueFROM SNMPv2-TC
InetAddressType,InetAddress,InetAddressDNSFROM INET-ADDRESS-MIB
sysName
FROM SNMPv2-MIB
InterfaceIndexOrZeroFROM IF-MIB
CiscoGslbNodeServices,
CiscoGslbPeerStatus
FROM CISCO-GSLB-TC-MIB
ciscoMgmt
FROM CISCO-SMI;ciscoGslbSystemMIB MODULE-IDENTITYLAST-UPDATED"200612040000Z"ORGANIZATION"Cisco Systems, Inc."
CONTACT-INFO"Cisco Systems
Customer Service
Postal: 170 W Tasman Drive
San Jose, CA 95134
USA
Tel: +1 800 553-NETS
E-mail: cs-slb@cisco.com"DESCRIPTION"This MIB module defines objects for network and system
information of Global Server Load Balancer(GSLB) as a
network device. A GSLB device is used to allocate the
least-loaded and proximate resource to the requester.
The MIB objects define information about GLSB status,
GSLB's peers (other GSLB devices available on its
network with which it interacts) information & status,
GSLB's proximity information related statistics, etc.
Further it defines related notifications.
Acronyms and their description:
DNS : Domain Name Service (RFC1035).
D-proxy : Local DNS name server of the client.
Proximity : Refers to the distance or delay, in terms
of network topology and not geographic
distance, between the requesting client's
D-proxy and the resources corresponding
to that request.
Proximity : To respond to DNS requests with the most
probing proximate answers, the GSLB device
communicates with a probing device located
in each proximity zone to gather round-trip
time (RTT) metric information measured
between the requesting client's D-proxy
and the zone. The GSLB device then directs
client requests to an available resource
with the lowest RTT value.
Probed : This is the device to which the GSLB device
device sends a proximity probe. This is done to
learn the proximity of the device.
DRP : Director Response Protocol (DRP) is a
simple User Datagram Protocol (UDP)
based application developed by
Cisco Systems, Inc. DRP enables
Cisco Distributed-Director product to
perform global load distribution and
content routing in a sophisticated manner
that accounts for server availability,
relative client-to-server topological
proximities, and client-to-server link
latency to determine the best server.
Using routing table intelligence in the
network infrastructure, Distributed-Director
transparently redirects end-user service
requests to the closest server, as
determined by client-to-server topological
proximity or client-to-server link latency,
resulting in increased access performance
seen by the end user.
Region : Higher-level geographical groupings that
may contain one or more locations. Each
location should be assigned to a region.
Location : Grouping for devices with common
geographical attributes. A location is
assigned to a region.
A location is also assigned to a zone,
which is used for proximity probing.
Zone : A network can be logically partioned into
zones based on the arrangement of devices
and network partion characteristics.
A zone can be geographically related to
data centers in a continent, a country,
or a major city. All devices, such as web
servers in a data center, that are located
in the same zone have the same proximity
value when communicating with other areas
of the Internet. Within each zone, there
is an active probing device that is
configured to accept probing instructions
from any GSLB device. Probing here refers
to the process of measuring RTT from one
probing device to a requesting D-proxy."REVISION"200612040000Z"DESCRIPTION"Initial version of this MIB module."::={ ciscoMgmt 589}ciscoGslbSystemMIBNotifs OBJECTIDENTIFIER::={ ciscoGslbSystemMIB 0}ciscoGslbSystemMIBObjects OBJECTIDENTIFIER::={ ciscoGslbSystemMIB 1}ciscoGslbSystemMIBConform OBJECTIDENTIFIER::={ ciscoGslbSystemMIB 2}-- Objects for Notification ControlcgsNotifControl OBJECTIDENTIFIER::={ ciscoGslbSystemMIBObjects 1}-- Objects for NotificationcgsNotifObjects OBJECTIDENTIFIER
::={ ciscoGslbSystemMIBObjects 2}-- Objects for general statuscgsGeneral OBJECTIDENTIFIER::={ ciscoGslbSystemMIBObjects 3}-- Objects for status of GSLB peerscgsPeer OBJECTIDENTIFIER::={ ciscoGslbSystemMIBObjects 4}-- Objects for Proximity Probes statisticscgsProxZoneStats OBJECTIDENTIFIER::={ ciscoGslbSystemMIBObjects 5}-- Objects for ResourcescgsResources OBJECTIDENTIFIER::={ ciscoGslbSystemMIBObjects 6}-- General Status ObjectscgsNodeService OBJECT-TYPESYNTAX CiscoGslbNodeServices
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object specifies the type of role of the GSLB
device amongst its peers."::={ cgsGeneral 1}cgsNodeCommIfName OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object specifies the textual name of the interface
used by the GSLB device to communicate with peer GSLB
devices. The value of this object must be same as the
ifName reported by IF-MIB for the interface instance."::={ cgsGeneral 2}cgsNodeCommIfIndex OBJECT-TYPESYNTAXInterfaceIndexOrZeroMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object is used as an identifier for the interface
used by the GSLB device to communicate with peer GSLB
devices. The value of this object must be same as the
ifIndex reported by IF-MIB for the interface identified
by cgsNodeCommIfName."::={ cgsGeneral 3}cgsNodeStatus OBJECT-TYPESYNTAX CiscoGslbPeerStatus
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies the status of the GSLB device as
known on the GSLB network of peers."::={ cgsGeneral 4}cgsNodeLocation OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..80))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object specifies the administratively assigned
location for the GSLB device."::={ cgsGeneral 5}cgsNodeRegion OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..80))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies the administratively assigned
region for the GSLB device. This value corresponds to
an instance of cgsLocationRegion from cgsLocationTable."::={ cgsGeneral 6}cgsPeerTable OBJECT-TYPESYNTAXSEQUENCEOF CgsPeerEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table lists the information on peers in the GSLB
network of devices."::={ cgsPeer 1}cgsPeerEntry OBJECT-TYPESYNTAX CgsPeerEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in cgsPeerEntryTable. Each entry contains
information on the GSLB peers. Entries are
added/deleted when a GSLB peer device is added/deleted
in GSLB network of peers."INDEX{
cgsPeerAddressType,
cgsPeerAddress
}::={ cgsPeerTable 1}
CgsPeerEntry ::=SEQUENCE{
cgsPeerAddressType InetAddressType,
cgsPeerAddress InetAddress,
cgsPeerLocation SnmpAdminString,
cgsPeerDnsName InetAddressDNS,
cgsPeerService CiscoGslbNodeServices,
cgsPeerStatus CiscoGslbPeerStatus,
cgsPeerVersion SnmpAdminString}cgsPeerAddressType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This object specifies the IP address type of the
GSLB peer."::={ cgsPeerEntry 1}cgsPeerAddress OBJECT-TYPESYNTAXInetAddress(SIZE(1..16))MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This object specifies the GSLB peer IP address.
The type of IP address is identified by
cgsPeerAddressType."::={ cgsPeerEntry 2}
cgsPeerLocation OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..80))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object specifies the administratively assigned
location of the GSLB peer. Its value must be same as
the value configured in cgsLocationTable."::={ cgsPeerEntry 3}cgsPeerDnsName OBJECT-TYPESYNTAXInetAddressDNSMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies the host name assigned uniquely
to a GSLB peer. Its value is same as the value of
sysName of the GSLB peer."::={ cgsPeerEntry 4}
cgsPeerService OBJECT-TYPESYNTAX CiscoGslbNodeServices
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies the type of role the GSLB peer
has in a GSLB network of peers. Its value is same as
value of cgsNodeService of the GSLB peer."::={ cgsPeerEntry 5}cgsPeerStatus OBJECT-TYPESYNTAX CiscoGslbPeerStatus
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies the status of GSLB peer as
known to the reporting GSLB device."::={ cgsPeerEntry 6}cgsPeerVersion OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"This object specifies the software version installed
on the GSLB peer."::={ cgsPeerEntry 7}cgsProxZoneTable OBJECT-TYPESYNTAXSEQUENCEOF CgsProxZoneEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table is used for configuring proximity zones.
It consists a list of proximity probing statistics
for each configured proximity zone."::={ cgsProxZoneStats 1}cgsProxZoneEntry OBJECT-TYPESYNTAX CgsProxZoneEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in cgsProxZoneTable. Each entry contains
information on proximity zones and probing statistics.
Entries can be added/deleted/modified by administrator
action."INDEX{ cgsProxZoneName }::={ cgsProxZoneTable 1}
CgsProxZoneEntry ::=SEQUENCE{
cgsProxZoneName SnmpAdminString,
cgsProxPrimaryAddressType InetAddressType,
cgsProxPrimaryAddress InetAddress,
cgsProxSecondaryAddressType InetAddressType,
cgsProxSecondaryAddress InetAddress,
cgsProxEchoSentReqs Counter32,
cgsProxEchoRcvdResps Counter32,
cgsProxSentMeasureReqs Counter32,
cgsProxRcvdMeasureResps Counter32,
cgsProxTotalSentReqs Counter32,
cgsProxTotalRcvdResps Counter32,
cgsProxSendRate Unsigned32,
cgsProxRcvdRate Unsigned32,
cgsProxPeakSendRate Unsigned32,
cgsProxPeakRcvdRate Unsigned32,
cgsProxStorageType StorageType,
cgsProxRowStatus RowStatus}cgsProxZoneName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..80))MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This object specifies a name given uniquely for
a proximity zone."::={ cgsProxZoneEntry 1}cgsProxPrimaryAddressType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSread-createSTATUScurrent
DESCRIPTION"This object specifies the IP address type of the
primary device being probed in the proximity zone."DEFVAL{ ipv4 }::={ cgsProxZoneEntry 2}cgsProxPrimaryAddress OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object specifies the IP address of the primary
device being probed in the proximity zone. The type of
IP address is identified by cgsProxPrimaryAddressType.
This object is mandatory for row creation."::={ cgsProxZoneEntry 3}cgsProxSecondaryAddressType OBJECT-TYPESYNTAXInetAddressTypeMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object specifies the IP address type of the
secondary device that may be probed in the
proximity zone."DEFVAL{ ipv4 }::={ cgsProxZoneEntry 4}cgsProxSecondaryAddress OBJECT-TYPESYNTAXInetAddressMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object specifies the IP address of the secondary
device that may be probed for proximity in the proximity
zone. The type of IP address is identified by
cgsProxSecondaryAddressType."DEFVAL{""}::={ cgsProxZoneEntry 5}cgsProxEchoSentReqs OBJECT-TYPESYNTAXCounter32UNITS"requests"MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"This object specifies the number of DRP echo requests
sent by GSLB to all probed devices."::={ cgsProxZoneEntry 6}cgsProxEchoRcvdResps OBJECT-TYPESYNTAXCounter32UNITS"responses"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies the number of DRP echo responses
received by GLSB from all probed devices."::={ cgsProxZoneEntry 7}cgsProxSentMeasureReqs OBJECT-TYPESYNTAXCounter32UNITS"requests"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies the number of DRP measured
requests sent by GSLB to all probed devices."::={ cgsProxZoneEntry 8}cgsProxRcvdMeasureResps OBJECT-TYPESYNTAXCounter32UNITS"responses"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies the number of DRP measured
responses received by GSLB from all probed devices."::={ cgsProxZoneEntry 9}cgsProxTotalSentReqs OBJECT-TYPESYNTAXCounter32UNITS"requests"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies the total of DRP requests sent
by GSLB to probed device in the proximity zone."::={ cgsProxZoneEntry 10}
cgsProxTotalRcvdResps OBJECT-TYPESYNTAXCounter32UNITS"responses"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies the total of DRP responses
received by GSLB from all probed devices in the
proximity zone."::={ cgsProxZoneEntry 11}cgsProxSendRate OBJECT-TYPESYNTAXUnsigned32UNITS"rate per second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies the current transmitted DRP
request rate per second."::={ cgsProxZoneEntry 12}cgsProxRcvdRate OBJECT-TYPESYNTAXUnsigned32
UNITS"rate per second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies the current received DRP response
rate per second."::={ cgsProxZoneEntry 13}cgsProxPeakSendRate OBJECT-TYPESYNTAXUnsigned32UNITS"rate per second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object specifies the peak transmitted DRP request
rate per second."::={ cgsProxZoneEntry 14}cgsProxPeakRcvdRate OBJECT-TYPESYNTAXUnsigned32UNITS"rate per second"MAX-ACCESSread-only
STATUScurrentDESCRIPTION"This object specifies the peak received DRP response
rate per second."::={ cgsProxZoneEntry 15}cgsProxStorageType OBJECT-TYPESYNTAXStorageTypeMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object specifies the storage type for this
conceptual row."DEFVAL{ nonVolatile }::={ cgsProxZoneEntry 16}cgsProxRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object is used to create/delete an entry in the
cgsProxZoneTable."::={ cgsProxZoneEntry 17}cgsRegionTable OBJECT-TYPESYNTAXSEQUENCEOF CgsRegionEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table is used to configure regions on the device.
It consists a list of regions configured on the GSLB
device."::={ cgsResources 1}cgsRegionEntry OBJECT-TYPESYNTAX CgsRegionEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in cgsRegionTable. Each entry contains the
information about a region. Entries can be
added/deleted/modified by administrator action."INDEX{ cgsRegionName }::={ cgsRegionTable 1}
CgsRegionEntry ::=SEQUENCE{
cgsRegionName SnmpAdminString,
cgsRegionComments SnmpAdminString,
cgsRegionStorageType StorageType,
cgsRegionRowStatus RowStatus}cgsRegionName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..80))MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This object specifies the name given uniquely for a
region."::={ cgsRegionEntry 1}cgsRegionComments OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-createSTATUScurrent
DESCRIPTION"This object specifies the comments associated with the
region."DEFVAL{""}::={ cgsRegionEntry 2}cgsRegionStorageType OBJECT-TYPESYNTAXStorageTypeMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object specifies the storage type for this
conceptual row."DEFVAL{ nonVolatile }::={ cgsRegionEntry 3}cgsRegionRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object is used to create/delete an entry in the
cgsRegionTable"::={ cgsRegionEntry 4}cgsLocationTable OBJECT-TYPESYNTAXSEQUENCEOF CgsLocationEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table is used to configure locations on the device.
It consists a list of locations configured on the GSLB
device."::={ cgsResources 2}cgsLocationEntry OBJECT-TYPESYNTAX CgsLocationEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in cgsLocationTable. Each entry contains the
information about a location. Entries can be
added/deleted/modified by administrator action."INDEX{ cgsLocationName }::={ cgsLocationTable 1}
CgsLocationEntry ::=SEQUENCE{
cgsLocationName SnmpAdminString,
cgsLocationRegion SnmpAdminString,
cgsLocationZone SnmpAdminString,
cgsLocationComments SnmpAdminString,
cgsLocationStorageType StorageType,
cgsLocationRowStatus RowStatus}cgsLocationName OBJECT-TYPESYNTAXSnmpAdminString(SIZE(1..80))MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This object specifies the name given uniquely for a
location."::={ cgsLocationEntry 1}
cgsLocationRegion OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object specifies a region to which this location
instance is associated.
This object is mandatory for a row creation."::={ cgsLocationEntry 2}cgsLocationZone OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object specifies a zone to which this location
instance is associated."DEFVAL{""}::={ cgsLocationEntry 3}cgsLocationComments OBJECT-TYPESYNTAXSnmpAdminString
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object specifies the comments associated with the
location."DEFVAL{""}::={ cgsLocationEntry 4}cgsLocationStorageType OBJECT-TYPESYNTAXStorageTypeMAX-ACCESSread-createSTATUScurrentDESCRIPTION"This object specifies the storage type for this
conceptual row"DEFVAL{ nonVolatile }::={ cgsLocationEntry 5}cgsLocationRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrent
DESCRIPTION"This object is used to create/delete an entry in the
cgsLocationTable"::={ cgsLocationEntry 6}-- Notification Control GroupcgsPeerEventNotifEnable OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object defines the administrative state of sending
notifications to signal a GSLB peer status change."DEFVAL{ false }::={ cgsNotifControl 1}-- Objects for NotificationcgsPeerPrevStatus OBJECT-TYPESYNTAX CiscoGslbPeerStatus
MAX-ACCESSaccessible-for-notifySTATUScurrentDESCRIPTION"This object is used for sending the value of cgsPeerStatus
before transitioning to new state."::={ cgsNotifObjects 1}-- NotificationsciscoGslbSystemPeerEventStatus NOTIFICATION-TYPEOBJECTS{
sysName,
cgsPeerDnsName,
cgsPeerService,
cgsPeerPrevStatus,
cgsPeerStatus
}STATUScurrentDESCRIPTION"This notification is sent when the value of
cgsPeerStatus changes from one state to another.
This notification is reported only by a GSLB device
with cgsNodeService value of 'primary'."::={ ciscoGslbSystemMIBNotifs 1}-- ConformanceciscoGslbSystemMIBCompliances OBJECTIDENTIFIER::={ ciscoGslbSystemMIBConform 1}
ciscoGslbSystemMIBGroups OBJECTIDENTIFIER::={ ciscoGslbSystemMIBConform 2}-- ComplianceciscoGslbSystemMIBCompliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"Compliance statement for entities which implement
the Cisco GSLB System MIB"MODULE-- this moduleMANDATORY-GROUPS{
ciscoGslbSystemGeneralGroup,
ciscoGslbSystemPeerGroup,
ciscoGslbSystemProxZoneGroup,
ciscoGslbSystemResourceGroup,
ciscoGslbSystemNotifControlGroup,
ciscoGslbSystemNotifObjectsGroup,
ciscoGslbSystemNotifGroup
}::={ ciscoGslbSystemMIBCompliances 1}-- Units of Conformance
ciscoGslbSystemGeneralGroup OBJECT-GROUPOBJECTS{
cgsNodeService,
cgsNodeCommIfName,
cgsNodeCommIfIndex,
cgsNodeStatus,
cgsNodeLocation,
cgsNodeRegion
}STATUScurrentDESCRIPTION"A collection of objects providing general GSLB status."::={ ciscoGslbSystemMIBGroups 1}ciscoGslbSystemPeerGroup OBJECT-GROUPOBJECTS{
cgsPeerLocation,
cgsPeerDnsName,
cgsPeerService,
cgsPeerStatus,
cgsPeerVersion
}STATUScurrentDESCRIPTION
"A collection of objects providing GSLB peer status."::={ ciscoGslbSystemMIBGroups 2}ciscoGslbSystemProxZoneGroup OBJECT-GROUPOBJECTS{
cgsProxPrimaryAddressType,
cgsProxPrimaryAddress,
cgsProxSecondaryAddressType,
cgsProxSecondaryAddress,
cgsProxEchoSentReqs,
cgsProxEchoRcvdResps,
cgsProxSentMeasureReqs,
cgsProxRcvdMeasureResps,
cgsProxTotalSentReqs,
cgsProxTotalRcvdResps,
cgsProxSendRate,
cgsProxRcvdRate,
cgsProxPeakSendRate,
cgsProxPeakRcvdRate,
cgsProxStorageType,
cgsProxRowStatus
}STATUScurrent
DESCRIPTION"A collection of objects providing GSLB proximity
zone statistics."::={ ciscoGslbSystemMIBGroups 3}ciscoGslbSystemResourceGroup OBJECT-GROUPOBJECTS{
cgsRegionComments,
cgsRegionStorageType,
cgsRegionRowStatus,
cgsLocationRegion,
cgsLocationZone,
cgsLocationComments,
cgsLocationStorageType,
cgsLocationRowStatus
}STATUScurrentDESCRIPTION"A collection of objects providing GSLB resource
configurations."::={ ciscoGslbSystemMIBGroups 4}ciscoGslbSystemNotifControlGroup OBJECT-GROUP
OBJECTS{ cgsPeerEventNotifEnable }STATUScurrentDESCRIPTION"This group of objects controls the sending of
notifications defined in this MIB module."::={ ciscoGslbSystemMIBGroups 5}ciscoGslbSystemNotifObjectsGroup OBJECT-GROUPOBJECTS{ cgsPeerPrevStatus }STATUScurrentDESCRIPTION"A collection of objects that convey information for
notifications defined in this MIB module."::={ ciscoGslbSystemMIBGroups 6}ciscoGslbSystemNotifGroup NOTIFICATION-GROUPNOTIFICATIONS{ ciscoGslbSystemPeerEventStatus }STATUScurrentDESCRIPTION"A collection of objects providing GSLB System events."::={ ciscoGslbSystemMIBGroups 7}
END